TOUGH STUFF® PVC Slotted Laterals are fabricated of high quality PVC pipe cut to length, slotted, welded and threaded in our plant. We have manufactured PVC laterals from our standard prints and to our customers’ specifications for almost 50 years.

• 8 Inch Pvc Pipe
• 8 Slotted Pvc Hose
• 8 Pvc Fitting
• 8 Slotted Pvc Pipe

TOUGH STUFF PVC Slotted Laterals are offered in three grades of wall thickness: thin wall SDR #26, Schedule 40 and Schedule 80. Standard diameters include .5', .75', 1.0', 1.25', 1.5' and 2.0'. One end is threaded MNPT. The other end is closed with a flat end plug.

Generally, laterals up to 5.0' long receive 1/16' spacing between slots. Laterals from 5.0' to 8.0' long receive 1/8' spacing. Laterals over 8.0' long receive 3/16' spacing. Laterals 1.5' in diameter and smaller are slotted in three rows. Laterals 2.0' in diameter and larger have four rows of slots. To minimize pressure loss when in service, the open area of slots in a TOUGH STUFF PVC Slotted Lateral is engineered to be more than 1-1/2 times the cross-sectional open area of the pipe.

Standard slot widths are 0.008', 0.010', 0.012' and 0.020'. Other slots widths are available for a nominal fee. TOUGH STUFF SLOTTED LATERALS are available in plastics other than PVC, including CPVC, polypropylene, Teflon and PVDF. We manufacture each lateral specifically as ordered, so most custom requests will not lengthen lead times. Please contact your MATTSON/WITT sales representative to discuss custom sizes, configurations and materials.

To accurately determine the length of a lateral, you must know both the tank and hub diameter. The formula is:

DR 14 Gasket PVC Pressure Pipe in Blue. Part #: DR14BPX. To see availability for this product, personLog In or Get Online Access $ 20 ft. Johnson Screens offers a slotted PVC well screen in addition to our Vee-Wire ® PVC well screens. Manufactured from ASTM D1784 and D1785 pipes, ASTM - F480 and NTP threads are available. Slotted screens have a much higher open area than perforated plate screens, and are easy to install at a lower cost.

TECHNICAL SPECIFICATIONS

Maximum recommended operating temperature............................... 140ºF (60ºC)
Maximum recommended operating pressure..................................... 150 PSI
∆P @ 5 ft./sec. velocity........................................................................ ≤ 3 PSI
Materials.............................................................................................. PVC & ABS
Slot width............................................................................................. 0.010' (0.254mm)

Hawk Plastics PVC Perforated Pipe

In some areas of the country this pipe is referred to as “Drain Tile” or Drainage Tile”

Available with perforated pipe socks – Helps eliminate dirt and debris from entering pipe.

Full Specifications Compliance with ASTM F758 and AASHTO M278

HAWK PLASTICS PERFORATED PRODUCTS: UNDERDRAIN & EDGE DRAIN
CONFORM TO THE FOLLOWING STATE’S DEPARTMENT OF TRANSPORTATION SPECIFICATIONS
ALDOT, FDOT, MDOT, SCDOT , NCDOT, GDOT, TXDOT, TDOT

8 Inch Pvc Pipe

<<< STOCK PRODUCTS ARE ASTM F 758 AND AASHTO M 278 HOLE PATTERNS >>>
ΦΘ CUSTOM HOLE PATTERNS ARE POSSIBLE UPON REQUEST AND AFTER RECEIPT OF ORDER ΦΘ

8 Slotted Pvc Hose

PACKAGES FOR TRUCKLOAD QUANTITIES OR CUSTOMER PICK UP

8 Pvc Fitting

HAWK PSM PVC PERFORATED PIPE

Airport and Highway Underdrain Pipe

Also meets AASHTO M-278 Class 50 PVC Smooth Wall Perforated Pipe

10 FEET LENGTHS & NARROW BUNDLE PACKAGING FOR LTL FRIENDLY SHIPMENTS

*NOTE: Gasketed perforated pipe, a non-stock item, is available by request only.

**NOTE: STANDARD 10/0’ Laying Length-20.0’ Length Special. Other SDR perforated pipe available from Factory upon request.
Consult sales for your requirements.

8 Slotted Pvc Pipe

***NOTE: Same stiffness as 6” Schl. 40 IPS Pipe.